|
联系我们
|
| 地 址：深圳市罗湖区太白路布心村111号布心大厦六楼D1室 |
| 邮 编：518000 |
| 联系人：王小姐 |
| 电 话：0755-82380408*805 |
| 传 真：0755-82380480 |
| 邮 箱：jane@rightproducts.com.hk |
|
|
|
|
|
|
B01253WANASCO Whirl-Pak带生物危害标记采样袋（非灭菌）
|
|
|
|
公司名称：
深圳市慧普德贸易有限公司
|
|
参考价格：
0
元
|
|
发布时间：
2012-07-09
|
| 产品描述： |
| NASCO Whirl-Pak的Trans-Pak™带生物危害标记采样袋可以确保样本的安全运送。侧边附袋，可放置检体信息，袋面印有生化危险物标记。 |
|
|
|
| |
| |
B01253WANASCO Whirl-Pak带生物危害标记采样袋（非灭菌）的详细介绍
Menu driven梕asy to use
Syringe pumps provide high pressure and accuracy in applications such as HPLC
Nonvolatile memory retains settings even when you turn off the pump
Accept glass or plastic syringes
Multi-syringe pumps have RS-232 communication capabilities梠perate one pump or daisy-chain multiple pumps from a personal computer
Built-in program lets you enter up to eight commands to perform a variety of functions梱ou can even repeat commands up to ten times; all settings are stored in nonvolatile memory
Pumps feature a wide dynamic range (100,000:1) allowing for flow rates from a slow trickle to a steady stream
RS-232 interface lets you operate your pump from a personal computer using a few simple commands梘reat for daisy-chaining pumps!
Backlit alphanumeric LCD steps you through setup and operating procedures
Syringe pumps offer unmatched performance and flexibility. Simply enter syringe size, desired volume, and desired flow rate梡ump automatically delivers the desired amount or pumps continuously. There抯 no need to look up values in charts to calculate flow rate. All models include a 6-ft cord with plug (U.S. standard plug on 115 VAC models, European plugs on 230 VAC models).
Program flow rate hold, pause, and change of direction; each command can be set to run for up to 12 hours. You can even program infusion/withdrawal pumps to sequence operations: either withdrawal followed by infusion or infusion followed by withdrawal. Choose pumps which accept two up to ten syringes梚deal for pumping exact proportions.
Pumps also feature two TTL inputs and two TTL outputs. The TTL inputs let you use a footswitch or a process timer to control pump operation. Use TTL outputs for 5 V signal and run indicator. All models include a 6-ft cord with grounded plug (U.S. standard plug on 115 VAC models, European plugs on 230 VAC models.
|
|
|
|
